Displaying System Information - Neoware c50 - Thin Client User Manual

Displaying System Information

You can display information about your thin client and its system
software either by pressing the keys Ctrl + Alt + i (default keyboard
shortcut), or by selecting
menu
:
or by double-clicking the
Panel
:
System Info
The dialog consists of three tabs:
General
The tab provides information about the operating system
version, CPU, system and board, including the serial number. It also
shows the amount of Flash memory and RAM available in your thin
client and how much is used.
Network
The tab displays information about your thin client's net-
work configuration. The MAC address is also displayed here.
Net Tools
The tab enables you to perform various operations to test
your network and discover IP addresses or hostnames.
Refer to the section "System Information" on page 277 for more
information.
System Tools System Info
>
System Information
Displaying System Information
Getting Started
from the
Control
icon in the
35