Network Configuration; Creating A New Connection - Neoware c50 - Thin Client User Manual

Getting Started

Network Configuration

Creating a New Connection

12 Network Configuration
If your network uses a remote configuration service such as DHCP
(Dynamic Host Configuration Protocol), the thin client will automat-
ically configure itself for the network when you switch it on.
If your network does not use DHCP, or you need to enter network
settings manually, refer to the section "Network Configuration" on
page 37 for details.
This section describes the basic procedure for creating a new
connection. The example illustrations show the creation of an ICA
connection, but the display for other connection types is very
similar. Descriptions of all the setup options available for each
connection type are provided in the following chapters.
menu
1 Click on the
display and select
Control Panel - Main
The
button in the taskbar at the bottom of the
Control Panel
in the menu.
window will be displayed.