Panasonic AG-AC90 Operating Instructions Manual page 41

∫ To set the White Balance in accordance to the recording scene
1 Fill the screen with a white subject or place a white piece of paper in front of
the lens.
2 Press the W.B. button to display Ach.
≥ When the operation icon is displayed and
3 Keep on pressing the W.B. button to start the White Balance adjustment.
≥ The screen goes dark momentarily, "WB SET OK" is displayed, and the adjustment ends.
≥ When the mode of White Balance is set to something other than Ach/Bch, the Black Balance
adjustment is performed by pressing and holding the W.B. button. Setting is completed when the
screen goes black momentarily and "BB SET OK" is displayed.
≥ When the White Balance/Black Balance cannot be performed, an error message "WB SET NG"
or "BB SET NG" is displayed on the screen. In such case, use other mode.
≥ The contents previously set are maintained in the Ach/Bch. Perform the setting again when the
recording condition has changed.
∫ To finely adjust the White Balance
White Balance for the Ach/Bch can be finely adjusted. Perform this after adjusting the White
Balance.
≥ Switch to Manual Mode.
1 Select the menu.
MENU
: [CAMERA SETUP] #
2 Touch /
3 Touch [EXIT] to complete the setting.
(l 33)
[COLOR TEMP A ch] or [COLOR TEMP B ch]
to adjust settings of color.
is touched, it will switch to
Ach
- 41 -
. (l 64)
Bch