Zebra; Color Bar Screen - Panasonic AG-AC90 Operating Instructions Manual

Zebra

ZEBRA button
It will switch between the zebra display and the marker display every time the button is pressed.
Zebra 1 # Zebra 2
* It is not displayed when the [ZEBRA DETECT 2]/[MARKER] is set to [OFF].
Zebra display:
Parts where white saturation (color saturation) is likely to occur (extremely brightly lit or shiny parts)
are displayed with diagonal lines (zebra pattern).
Marker display:
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance level of
the object, when recording same object in different surroundings.
≥ Marker display is displayed between 0% and 99%. It will be displayed as 99% when it is over
99%.
≥ You can record an image with little white saturation if you manually adjust the shutter speed or
brightness. (l 42, 44)
≥ The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed.

Color Bar Screen

BARS button
Press the BARS button to output a color bar screen to a television or monitor so you can adjust
them.
≥ To cancel, press the BARS button again.
≥ It will be canceled when the unit is turned off.
≥ While the color bar is displayed, a test tone will be output from the headphone terminal, HDMI
terminal and AV multi terminal. (The test tone that is output will be 1 kHz.) It will not be output
from the speaker of this unit.
≥ It is possible to record the color bar screen.
* *
# Marker # setting canceled
- 62 -
(l 96)
(l 95, 96)