Panasonic AG-AC160A Operating Instructions Manual page 94

Item
[CENTER <CAMERA> Sets the marker display to [ON]/[OFF].
MARKER]
[FOCUS BAR] <CAMERA> Sets the FOCUS ASSIST bar display to [ON]/[OFF]. Select [ON] to display the
[IRIS METER] <CAMERA> Sets [IRIS METER] display.
[REC <CAMERA> Selects counter operation during shooting.
COUNTER]
[VIDEO OUT <CAMERA>
OSD] <PB>
[DATE/TIME] <CAMERA>
<PB>
[DATE <CAMERA>
FORMAT] <PB>
[LEVEL <CAMERA>
METER] <PB>
[ZOOM& <CAMERA> Selects the unit of zoom and focus values.
FOCUS]
94
Display
mode
Select [ON] to display the marker by pressing the <ZEBRA> button.
[ON], [OFF]
FOCUS ASSIST bar.
[ON], [OFF]
[ON]: Displays the difference from an optimum value for the brightness of
the image, as judged by the camera. The bar appears on the right:
The image is too bright. The bar appears on the left: The image is
too dark.
[OFF]: IRIS METER is not displayed.
[TOTAL]: The count continues to increase until the <COUNTER> button is
pressed to reset it.
[CLIP]: Resets the counter at the start of recording and counts the time of
each recording session.
• The count is not displayed in <PB> mode.
Select [ON] to output the information displayed on the viewfinder or LCD monitor
together with the signals from the VIDEO OUT jack.
[ON], [OFF]
• The external outputs <VIDEO OUT>, <SDI OUT>, <HDMI> include items that
are not displayed.
Sets whether to display the date and time on the viewfinder or LCD monitor and
whether to output the date and time from the VIDEO OUT jack.
[OFF]:
[TIME]:
[DATE]:
[TIME&DATE]: The date and time are displayed.
Changes the style of displaying the year, month, and day. (The factory setting
values may vary depending on the region.)
[Y/M/D]:
[M/D/Y]:
[D/M/Y]:
Switches the audio level meter display [ON]/[OFF].
[ON], [OFF]
[OFF], [NUMBER], [mm/m], [mm/feet]
• The [mm/feet] display and [mm/m] display may be in error, so please use them
as approximations.
Description of settings
The date and time are not displayed.
The time is displayed.
The date is displayed.
Year/Month/Day
Month/Day/Year
Day/Month/Year
is the factory default mode.