Setting User Information - Panasonic AG-AC160A Operating Instructions Manual

Setting user information

Setting user information allows you to store 8-digit
memo information in the hexadecimal format. User
information is automatically saved in the memory
and retained after you turn off the power.
In DV mode, [USER]/[TIME]/[DATE]/[TCG]/[FRAME
RATE] can be selected with the [UB MODE] item
on the setup menu [TC/UB SETUP] screen. Select
[USER] to set user information in DV mode.
1
Turn the POWER/MODE switch of the
camera <ON>. (Page 30 of Vol.1)
2
Select the [UB PRESET] item on the setup
menu [TC/UB SETUP] screen.
• Menu operation (Page 31 of Vol.1)
• Operations can be performed with buttons on
the remote control that correspond to those on
the camera. For details, see "Remote control"
(Page 24 of Vol.1).
3
Tilt the OPERATION lever in the < >
direction to move to [YES], and push the
OPERATION lever.
4
Set the user information.
Tilt the OPERATION lever in the < >< >
directions to select user information characters.
• You can set numbers from 0 to 9 and letters
from A to F for the user information.
Tilt the OPERATION lever in the < > direction
to move to the next digit, and tilt in the < >< >
directions again to select the character.
• You can reset the user information to zero by
pressing the <RESET/TC SET> button while
setting the user information.
Camera
5
When finished setting the user information,
push the OPERATION lever.
6
Tilt the OPERATION lever in the < >
direction to move to [YES], and push the
OPERATION lever.
53