Table of Contents
Advertisement
Auto Test Performs multiple tests of the selected items and AUTO check the
select test items in sequence.
Note: PCMCIA Diagnostic Supports Manual test only. Do not select
PCMCIA Diagnostic in Auto Test.
The screen below appears if you select AUTO Test.
PQA
Diag
Result
Diag
MANUAL TEST
AUTO
TEST
TEST COUNT VALUE (1...9999) 1
Specify the desired number of tests and press Enter.
After you specify the number of tests to perform, the screen shows a list of
test items (see below).
PQA
Result
Diag
Diag
Test Items
MANUAL TEST
[ ] Sytem Board
AUTO
TEST
[ ] Memory
[ ] Keyboard
[ ] Video
[ ] Parallel Port
[ ] Serial Port
[ ] Diskette Drive
[ ] Hard Disk
[ ] CD-ROM
[ ] Coprocessor
[ ] Pointing Dev.
[ ] Cache
Move the highlight bar from one item to another. Press Space to enable or
disable the item. Press Enter to view the available suboptions of each
selected item. Press Esc to close the close the submenu.
72
Vx_x
xx-xx-xx
Option
SysInfo
Vx_x
xx-xx-xx
Option
SysInfo
SPACE: mark/ummark selecting item
ESC
: return to upper menu
F2
: test the marked item(s)
ENTER: open subitem's menu
Test Times = 1
Exit
Exit
TravelMate 310 Service Guide
Advertisement
Table of Contents
