Table of Contents
Advertisement
box to remove the existing password.
4. Press Esc to go to the Exit menu.
5. Press Save Change & Exit to save the password and exit the Setup
Utility.
Power Saving
The Power Saving screen contains parameters that are related to power-
saving and power management.
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Parameter
Heuristic Power
Management
Display Always On
Battery Low
Suspend
28
Enables or disables power management based on timeout
settings in this screen.
Options: Enabled or Disabled
When enabled the computer does not enter display
standby mode.
Always enable this parameter when playing VCDs (Video
Compact Disc). If not, the system will enter standby mode
after 30 minutes and the screen will go blank.
Options: Enabled or Disabled
Enables or disables the suspend function during a battery-
low condition. When the computer is running very low on
battery power, the computer will enter suspend mode if
PhDISK is installed and the suspend file is valid. .
Options: Enabled or Disabled
Description
TravelMate 310 Service Guide
Advertisement
Table of Contents
