Getting Started - Acer CoPilot Pocket PC 6 Quick Start Manual

Getting Started

Setting up your Acer n300
Set up your Acer n300 following the instructions as described
in the PDA's manual.
Please ensure your Acer n300's battery is fully charged.
Set the correct date and time on your Acer n300 for optimum
performance.
Installing CoPilot on your Acer n300
CoPilot software and maps is pre-loaded on the CoPilot storage
card.
Simply insert the card into the SD card slot on the Acer n300.
Installation will begin automatically.
Follow the on-screen steps:
Safety and license agreement: Select
GPS technology information: Select
Installation of the
commence. Select
CoPilot Pocket PC application. Press 'Install'.
Note: If set-up does not automatically run after inserting the card,
select Windows Start > Programs > File Explorer
the storage card and select the
Acer n300 Edition
CoPilot Pocket PC
'Device' as the location to install the
'2577' folder and press
'I accept'
'OK'
application will
then browse to
'Autorun'.
CoPilot Pocket PC 6
EN
1