Advanced Information - Acer Aspire 1606 Service Manual

Advanced Information

The Advanced Information screen contains parameter values that define how your computer behaves on
system startup.
Information
Legacy Diskette A:
. Primary Master
. Secondary Master
Hyper Threading Technology
. PCI IRQ Routing
Resume on LAN/Modem Access:
Reset Configuration Data:
System Boot From Hard Disk
Recovery
F1 Help
Esc Exit
The following table describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Legacy Diskette A
Primary Master
Secondary Master
Hyper Threading
Technology
PCI IRQ Routing
Resume on LAN/Modem
Access
Reset Configuration Data
System Boot From Hard
Disk Recovery
41
PhoenixBIOS Setup Utility
Main Advanced
[1.44/1.25MB ]
[FUJITSU MHS2040AT]
[UJDA740 DVD/CDRW]
[Disabled]
[Enabled]
[No]
[Enabled]
Select Item F5/F6 Change Values
Select Menu Enter Select Sub-Menu F10 Save and Exit
Enable or Disable Legacy Diskette A
Note: Selects floppy type. Note that 1.25MB
references a 1024 byte/sector Japanese media
format. The 1.25MB diskette requires a 3-Mode
floppy-disk drive.
Show IDE Primary Master HDD size.
User can enter submenu to set some detail
functions
Show IDE Secondary Master Device Status.
User can enter submenu to set some detail
functions.
Enables 2nd logical processor.
Note: This setting is only available for CPU
3.06GHz or above.
Set Default IRQ of PCI device.
Note: Menu used to set IRQ for PCI Devices.
Set Enabled or Disabled to wake on LAN/Modem
access.
Select "Yes" to clear the extended system
configuration (ESCD) data.
Recovery from hard disk drive, which contains
ghost image.
Security Boot
Select Floppy Disk type.
F9
Description
Exit
Item Specific Help
Setup Defaults
Options
1.44/1.25MB or Disabled
Auto, User, None or ATAPI
Removable
Auto, User, None or ATAPI
Removable
Disabled or Enabled
Auto/ User Select
Enabled or Disabled
No or Yes
Enabled or Disabled
Aspire 1606