Index Of Phlash16 Error Message - Acer Aspire 1606 Service Manual

Index of Phlash16 Error Message

Error Codes
-1 or // FF
-2 or // FE
-3 or // FD
-4 or // FC
-5 or // FB
-6 or // FA
-7 or // F9
-8 or // F8
-9 or // F7
-10or // F6
-11 or // F5
-12 or // F4
-13 or // F3
-14 or // F2
-15 or // F1
-16 or // F0
-17 or // EF
-18 or // EE
-19 or // ED
-20 or // EC
-21 or // EB
-22 or // EA
-23 or // E9
-24 or // E8
-25 or // E7
-26 or // E6
-27or // E5
-28 or // E4
-29or // E3
-30 or // E2
-31 or // E1
-32 or // E0
-33 or // DF
-34 or // DE
-35 or // DD
-36 or // DC
-37 or // DB
-38 or // DA
-39 or // D9
-40 or // D8
-41 or // D7
-42 or // D6
-43 or // D5
Chapter 4
Memory allocation for Backup file buffer failed.
BIOS.BAK already exists (rename or delete it)
File Create failed on BIOS.BAK
File Write failed on BIOS.BAK
File Close failed on BIOS.BAK
BIOS backup not supported in BIOS ROM file.
File Open failed on BIOS ROM file.
File Read failed on BIOS ROM file.
File Close failed on BIOS ROM file.
Failed to locate signature bytes in BIOS ROM file.
Unsupported BIOS ROM file version.
V0.10 must fit ROM size and address within 1MB.
V2.00 must have block descriptor table and image buffer.
Device table has too many entries.
Device table has unsupported flash type.
Combined SAVE or RESTORE attributes in BIOS file.
SAVE block without matching RESTORE block in BIOS file.
V0.10 must have JMP table for platform procs.
V2.00 must have OFFSET table for platform procs.
BIOS file found errors in command line parameters.
Part ID not found in table of supported parts.
Allocation for BIOS ROM image failed.
Open failed on BIOS ROM file.
Read failed on BIOS ROM file.
Copy of REAL to EXTENDED memory buffer failed.
File close failed on BIOS.WPH.
Cannot flash if Memory Managers (e.g. EMM 386) is present.
Attempt to read flash memory ID failed.
BIOS ROM file failed to return flash memory ID.
Could not find BCP SYS block in BIOS.WPH file image.
File has different BIOS part number.
File contains same version of BIOS ROM image.
Data written to flash does not match BIOS ROM image.
Write to flash memory failed.
Erase flash memory block failed.
VPP is not at expected level.
Erase sequence failed.
New DMI string is too large.
Specified BIOS ROM file is not for this system.
Allocation for DMI OEM string failed.
No space for specified DMI OEM string in BIOS ROM.
DMI OEM strings require BCP DMI 0.1+.
Could not find BCP DMI block in BIOS ROM file image.
Error Message
98