Disassembling The Main Unit; Removing The Keyboard Bracket; Removing The Dc Charger Plate; Removing The Rtc Battery - Acer Aspire 1606 Service Manual

Disassembling the Main Unit

Removing the Keyboard Bracket

1. See "Removing the Battery Pack" on page 56
2. See "Removing the Middle Cover" on page 61
3. See "Removing the Keyboard" on page 62
4. Remove the keyboard support bracket from the main unit carefully.

Removing the DC Charger Plate

1. See "Removing the Battery Pack" on page 56
2. See "Removing the Middle Cover" on page 61
3. See "Removing the Keyboard" on page 62
4. See "Removing the LCD Module" on page 62
5. Remove the two screws as shown and then detach the DC charger Plate from the main board.

Removing the RTC Battery

1. See "Removing the Battery Pack" on page 56
2. See "Removing the Middle Cover" on page 61
3. See "Removing the Keyboard" on page 62
4. See "Removing the Keyboard Bracket" on page 67
5. See "Removing the DC Charger Plate" on page 67
6. Disconnect the RTC cable and then remove the RTC battery from the upper case gently.
67 Aspire 1606