Ejecting The Cd Or Dvd Tray; Playing Dvd Movies - Acer TravelMate 610 series User Manual

You can also swap other bay modules into the AcerMedia bay. For
more information, see "Swapping AcerMedia bay drive modules" on
page 50.

Ejecting the CD or DVD tray

To eject the CD or DVD tray when the computer is turned on, press the
drive eject button. When the power is off, you can eject the drive tray
using the emergency eject hole. See page 60 for more details.

Playing DVD movies

When the DVD-ROM drive module is installed in the AcerMedia drive
bay, you can play DVD movies on your computer.
1 Eject the DVD tray and insert a DVD movie disc; then close the DVD
tray.
Important! When you launch the DVD player for the first time,
the program asks you to input the region code. DVD discs are
divided into 6 regions. Once your DVD drive is set to a region
code, it will play DVD discs of that region only. You can set the
region code a maximum of five times (including the first time),
after which the last region code set will remain permanent.
Recovering your hard disk does not reset the number of times the
region code has been set. Refer to the table later in this section
for DVD movie region code information.
2 The DVD movie will automatically play after a few seconds.
Region Code Country or Region
1 U.S.A., Canada
2 Europe, Middle East, South Africa,Japan
3 Southeast Asia, Taiwan, Korea (South)
4 Latin America, Australia, New Zealand
5 Former U.S.S.R., parts of Africa, India
6 People's Republic of China
23