Installing The Lcd Module; Installing The Launch Board - Acer Aspire 1610 Series Service Manual

Installing the LCD Module

Installing the LCD Module
1. Place the LCD module to the main unit.
2. Fasten the LCD module with the two screws on the bottom; one on the right and another one on the left.
3. Secure the LCD hinge with the four screws; two on the right and two on the left.
4. Connect the inverter cablet to the main board. Connect the LCD coaxial cable to the maine board. Then
fasten the LCD coaxial cable with one screw.

Installing the Launch Board

1. Attach the launch board to the middle cover. Then secure the launch board with the two screws as the
picture shows.
83 Aspire 1610