LCD Module Removal
0
Prerequisite:
Battery Pack Removal
1. Disconnect the WLAN antennas from the WLAN module connectors (A)
(Figure
1-28).
2. Remove the WLAN antennas (B) from the cable guides as shown in
Figure
1-28.
3. Disconnect the eDP cable from the mainboard connector (C)
(Figure
1-28).
4. Remove the eDP cable (D) from the cable guides as shown in
Figure
1-28.
D
B
C
A
Figure 1-28. LCD Module Removal
1-25
Machine Maintenance Procedures