Installing The Hdd Bracket; Installing The Odd Module - Acer Aspire 1610 Series Service Manual

5. Connect the speaker set cable to the main board. Then stick the tape that fastens the speaker set cable.
Connect the launch board cable to the main board.

Installing the HDD Bracket

1. See "Installing the Speaker Set" on page 86.
2. See "Installing the DC Board" on page 86.
3. See "Installing the PCMCIA Slot" on page 86.
4. See "Installing the Main Board" on page 86.
5. Attach the HDD bracket. Then secure the HDD bracket with the four screws.

Installing the ODD Module

1. See "Installing the Speaker Set" on page 86.
2. See "Installing the DC Board" on page 86.
3. See "Installing the PCMCIA Slot" on page 86.
4. See "Installing the Main Board" on page 86.
5. See "Installing the HDD Bracket" on page 87.
6. Put the ODD support bracket to the lower case assembly, and then fasten the ODD support bracket with
the one screw. Place the ODD back in the ODD support bracket, and then push the ODD to the original
position.
71 Aspire 1610