HP Model 748 - VME Workstation Installation Manual page 5

Cable connector
FW External Connector
with Terminator
*DDS Tape Drive or Floppy Disk Drive
Figure 1 Configurations for the Mass Storage Module in Model with Short Cable
All devices are mounted in
the chassis as shown for the
SE Device or FW Drive
except for the FW drive
mounted behind the CD–ROM
drive.
The FW drive behind the
CD–ROM drive is turned 90
with the cable connector
turned toward the center
of the chassis
SE External Connector
with Terminator
Figure 2 Configurations for the Mass Storage Module with Long Cable
*SE Device
or
FW Drive
SE Hard Drive
or
FW Drive
FW Cable
FW Cable
FW Drive
o
CD ROM
5
All devices are mounted in
the chassis as shown for the
CD ROM
SE Device or FW Drive
except for the FW drive
mounted behind the CD–ROM
drive.
The FW drive behind the
CD–ROM drive
with the cable connector
turned toward the center
of the chassis
FW Drive
SE Cable
SE External Connector
with Terminator
FW External Connector
with Terminator
SE Hard Drive
or
FW Drive
Cable connector
*SE Device
or
FW Drive
SE Cable
*DDS Tape Drive or Floppy Disk Drive
o
is turned 90