HP Model 748 - VME Workstation Installation Manual page 2

Introduction
These instructions document how to install the A4350A upgrade kit in the Model 748i/64 or 748i/100
Ruggedized Workstation (Kit A4309–70006) or TELEPACE (Kit A4350–70008).
Kit Contents
The tray in each kit come preassembled. The following are parts checklists for tray assemblies in Kit
numbers A4309–70006 for Model 748i/64 or 748i/100 and A4350–70008 for TELEPACE.
Kit A4309–70006
Tray
SE Cable
FW Cable 14 inch
Power Cable
FW Bracket and screw
Bracket Plug
FW Tray Trim and screw
Terminators (SE and FW)
Installation Guide
Wrist Strap
Bag
Static Note
Tie wraps
Field Replaceable Units
The following are the spare part numbers for the tray assemblies
Description
Tray Assembly (Short Cable)
Tray Assembly (Long Cable)
Kit A4350–70008
Tray
SE Cable
FW Cable 50 inch
Power Cable
FW Bracket and screw
Bracket Plug
FW Tray Trim and screw
Terminators (SE and FW)
Installation Guide
Wrist Strap
Bag
Static Note
Tie wraps
Part Number
A4309–60003
A4350–60007
2