Battery Installation; Battery Notice - VTech Scroll & Learn Camera User Manual

BATTERY INSTALLATION

NOTE: For best performance, remove all factory-installed batteries
and use new, alkaline batteries.
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit and open it.
3. Insert 2 "AA" sized batteries as illustrated.
4. Close the battery cover.
RECHARGEABLE BATTERIES ARE NOT
RECOMMENDED.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable (Ni-Cd, Ni-MH), or new and
used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
4