HP Model 745 - VME Workstation Installation page 3

Wall Installation
Model 748 ONLY.
Figures 4, 5, and 6.
You may want to remove the feet.
235.0 mm EIA Standard Wall Mount for Model 748.
1. Pull off the
power switch button,
then press the
switch arm in
to ON.
Figure 5: Removing Switch Button & Light Pipe
465.5 mm
2. Press the light pipe
catch to the left,
then pull out the
light pipe.
1. Set the workstation upside
down, then pry the three
front cover bottom
catches loose.
Figure 4: Removing Front Cover
Figure 6: Wall Mount
3
2. Pry side catches loose
and work front cover
off the workstation.
1. Attach the
spacer and
flange with
flange screws.
CAUTION:
Get two people
to help you hold
the workstation
to wall for
mounting.
2. Install the
workstation to
the wall with
dress screws.