Tv Components; Package Contents; Front - Insignia NS-24E340A13 User Manual

Insignia 24" 1080p LED TV
3 Remove the stand column.
4 Attach the wall-mount bracket to your TV using
the mounting holes on the back of your TV. See
the instructions that came with the wall-mount
bracket for information about how to correctly
hang your TV.
Note
• The length of the wall-mount screws vary
depending on the wall-mount bracket you
purchased. See the instructions that came with
the wall-mount bracket for screw lengths.
• The mounting holes on the back of your TV take
type M4 screws.
2.95 in. (75 mm)

TV components

Package contents

Front

# Item
1
2
3
4
5
6
7
Wall-mount brackets
www.insigniaproducts.com
• Remote control and batteries (2 AAA)
• Stand base and screw (1)
• Power cord
• Quick Setup Guide
• Important Information
Description
Turns off when your TV is on.
Power indicator
Lights red when your TV is off (standby mode).
Receives signals from the remote control. Do not block.
Remote control sensor
Press to open the on-screen menu. For more
MENU
information, see
Press to open the Input Source list, press CH
CH to select a video input source, then press
INPUT again. For more information, see
INPUT
the video input
In menu mode, press to confirm selections.
VOL+/VOL– Press to increase or decrease the volume.
Press to go to the next or previous channel in the
channel list. For more information, see
CH /CH
channel" on page 23.
Press to turn your TV on or off (standby mode). When
your TV is off, power still flows through it. To
/POWER
completely disconnect power, unplug the power cord.
"Navigating the menus" on page 22.
or
"Selecting
source" on page 21.
"Selecting a
5