Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source - Insignia NS-24E340A13 User Manual

Insignia 24" 1080p LED TV
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
How did you connect the cable box to the TV?
AV, Component, or HDMI
MOVE OK
SELECT
ENTER
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
C If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
How did you connect the satellite box to the TV?
AV, Component, or HDMI
MOVE OK SELECT
ENTER
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
12 To watch TV, press INPUT, press
highlight the video input source for your TV in
the Input Source list, then press ENTER.
Coaxial
PREVIOUS EXIT
MENU EXIT
Coaxial
PREVIOUS EXIT
MENU EXIT
or to
www.insigniaproducts.com
• If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
• If your TV is connected to a cable or satellite
box using an HDMI cable or HDMI cable with a
DVI adapter, select HDMI 1 or HDMI 2.
• If your TV is connected to a cable or satellite
box using a component video cable, select
Component.
• If your TV is connected to a cable or satellite
box using a composite video cable, select AV.

Understanding the basics

Turning your TV on or off

To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (power) to turn on your TV. The power
indicator turns off.
3 Press (power) again to turn off your TV. Your
TV enters standby mode, and the power
indicator LED turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.

Selecting the video input source

To select the video input source:
1 Turn on your TV, then press INPUT. The Input
Source list opens.
INPUT SOURCE
Component
2 Press or to select a video input source, then
press ENTER.
You can also press a Quick Launch Input button to
select the video input source.
• Press TV to select TV (if your TV is connected to an
antenna, cable TV (no box), or cable or satellite TV
using a coaxial cable).
• Press VIDEO to select component or composite
input.
• Press HDMI one or more times to cycle between
the HDMI inputs.
TV
AV
VGA
USB
HDMI1
HDMI2
21