Changing Channel Settings; Automatically Scanning For Channels; Hiding Channels - Insignia NS-24E340A13 User Manual

Insignia 24" 1080p LED TV

Changing channel settings

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH or CH , your TV goes to the next or
previous channel in the channel list.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
OK
MOVE
ENTER
Adjust settings to affect picture quality
2 Press or to highlight CHANNELS, then press
or ENTER. The Channels menu opens.
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
OK
MOVE
ENTER
Automatically search for channels, press ENTER key to submenu.
3 Press or to highlight Auto Channel Search,
then press ENTER. The Channels · Auto Channel
Search screen opens.
Channels
Auto Channel Search
Choose Your TV Source
OK
MOVE
ENTER
Select if you have cable service
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
50
46
78
SELECT PREVIOUS EXIT
MENU
EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Off
SELECT PREVIOUS EXIT
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Antenna
Cable
Satellite box
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
4 Press or to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
B If you select Cable, a message asks if you
have a cable box:
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
C If you select Satellite Box, a message asks
how you connected the satellite box to your
TV:
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.

Hiding channels

You can hide channels in the channel list. When you
press CH or CH
channels. You can still tune to a hidden channel by
pressing the number buttons for the channel.
To hide channels:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Brightness
Contrast
Color
Advanced Video
Reset Picture Settings
OK
MOVE
ENTER
Adjust settings to affect picture quality
, your TV skips the hidden
PICTURE AUDIO CHANNELS SETTINGS PHOTOS
Energy Savings
50
46
78
SELECT PREVIOUS EXIT
MENU
EXIT
27