Backup Software And Drivers - HP VS160 - StorageWorks DLT Tape Drive Troubleshooting Manual

Backup software and drivers

Backup software
For optimum performance it is important to use a backup application that is appropriate for
your system's configuration. In a direct attach environment, where the tape drive is attached to
a standalone server, you can use backup software that is designed for a single server
environment. In network configurations you will need backup software that supports enterprise
environments. HP, Veritas, Legato, Yosemite and Computer Associates all provide suitable
products. Further details about these and other products that may be appropriate can be
found on our connectivity web site.
1
Go to our connectivity web site:
2
Select software compatibility .
3
Select your combination of operating system and tape drive model in the table. A list of
supported backup applications is displayed.
4
Make sure you have a backup application that supports HP StorageWorks VS160 tape drives
and download any upgrades or patches, if required.
Drivers
Windows users
After you connect the tape drive, download the HP driver from our web site:
support , see "Step 5: Verify installation" on page 19.
Refer to the accompanying README file for specific installation instructions for Windows
2000, Windows XP and Windows Server 2003 drivers.
Note: We recommend that you install drivers from the web rather than the Windows
Hardware Installation Wizard, because the HP drivers fully support the performance of your
tape drive.
www.hp.com/go/connect and select tape backup .
www.hp.com/
5