HP VS80 - StorageWorks DLT VS 80 Tape Drive User Manual page 56

unix sco frequently asked questions
data protection
drivers FAQs
windows NT
netware
unix - SCO
unix - linux
file:///C|/Documents%20and%20Settings/topher.COL-SPRINGS/Desktop/dltvs80%20manual/document/common/drivers_faqs/eng/us_q7.htm [11/29/2001 8:35:15 AM]
http://www.hp.com/support/tape may have a later version
frequently asked questions
"Why do I get SCSI errors when using my tape drive?"
contents of this section
causes of SCSI errors
upgrading to the latest SCSI
transport drivers
changing drivers
This topic is available in English only
causes of SCSI errors
There can be many causes of SCSI errors:
1. Cabling can be too long, too many devices connected, no bus termination,
non-shielded internal cables being used for external applications, badly
seated connectors, tape drive has same SCSI ID as another device etc.
2. SCSI HBA.
3. Tape Drive.
4. HBA Driver.
5. Tape Device Driver.
6. Backup Application.
Of all of the above, cabling and drivers are by far the most likely causes of SCSI
errors.
upgrading to the latest SCSI transport drivers
If you are experiencing SCSI errors, then having checked your cabling you should
consider upgrading your SCSI transport drivers to use the latest drivers ("alad" /
"arad" / "slha").
In at least one case (SCO OpenServer 5.0.0 release), it has been found that the
SCSI HBA vendor had a better functioning driver than the one shipped with SCO.
However, as of SCO OpenServe 5.0.4, the drivers included with OpenServer are
believed to be "good".
Drivers are constantly being refined by manufacturers. Hewlett-Packard's
experience has shown that using the latest versions of drivers (especially HBA
drivers) can solve many of the SCSI problems that can occur.
changing drivers
Check out the answer to the question
aware of when changing drivers in my system?"
system.
next question
Go to the next question
by SCO?"
related topics
"Are there any important points I need to be
"How do I use the built-in Tape Backup applets provided
hp learning products
back to list of questions
previous question
next question
before altering drivers in your
© 1999-2001, Hewlett-Packard Company