KRAUSE & BECKER 68001 User Manual page 11

Clean the Sprayer ImmedIAtely after use. delayed or inadequate cleaning will permanently clog the
Spray Gun. Warranty void if sprayer is not properly cleaned immediately after every use.
to Relieve Sprayer Pressure
1. Turn Power Switch off and unplug unit from outlet.
2. Switch Prime/Spray switch to Prime mode.
3. Point gun into paint pail and activate
Sprayer Trigger to relieve pressure.
SKU 68001
Notice
For technical questions, please call 1-800-444-3353.
4. Turn Trigger Lock Knob to Locking position.
5. Switch Prime/Spray switch to Prime mode.
Page 11