How To Remove Cartridges - Dell PowerVault 120T DDS4 User Manual

Dds4 autoloader
Hide thumbs Also See for PowerVault 120T DDS4:
Table of Contents

Advertisement

Figure 3-7 Inserting cartridges into the top magazine shelf
3. Data cartridge should be inserted in the middle shelf of the magazine (No. 8).
A cleaning cartridge can be inserted instead of data cartridge on it depending on
application software, see Figure 3-8.
Figure 3-8. Inserting a cartridge into the middle magazine shelf
NOTE : Insert the cartridge in the correct direction of the indication (arrow) on the top
cover.If a cartridge is inserted into the magazine upside down, magazine is
automatically ejected. After correcting to insert the cartridges with correct direction and
setting them in turn as setting first, insert the magazine again into the autoloader. The
autoloader starts to do the rotation check from the first.
How to Remove the Cartridges
To remove the cartridges from the magazine may upset the orders of them. So you are
recommended to store the cartridges in the magazine just as it is, provided that you
have no special reason.
1. Pressing down on the magazine stopper, place your finger in the hole at the rear of
the magazine and push data cartridges toward the front of the magazine, see Figure 3-9.
3-6 Dell PowerVaullt 120T DDS4 Autoloader User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powervault 120t

Table of Contents