Ch6. Troubleshooting - Samsung iPolis SND-460V User Manual

Ch5. How to Operate Camera
- AREA MODE : Determines whether to use the area
selected in the AREA SEL, and the
size and position of the area.
- MASK COLOR : Determine area color. You can select
Gray, Green, Red, Blue, Black, White.
- TRANSP : Determine the transparency of
selected area as controlling number
from 0 to 3.
- RETURN : Select this to save the PRIVACY menu
settings and return to the SPECIAL menu.
• DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
Notes
• The chance of resolution decrease is existed because DIS function uses the digital zoom.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or white wall.
• When using the DIS mode, the D-ZOOM level is required to set up over 46.
• LANGUAGE : You can select the menu language according to your requirements.
• RESET : Resets the camera settings to the factory defaults.
• RETURN : Select this to save the SPECIAL menu settings and return to the
SPECIAL menu.
5.2.9. EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
72
NETWORK CAMERA User's Manual

Ch6. Troubleshooting

If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
• Nothing appears on the screen.
Please check the power connection.
▶
Please check the video signal line connection.
▶
• The video image is not clear.
▶ Please check if the lens is clean. Please clean the lens with a clean cloth or brush.
▶ Please adjust the contrast feature of the monitor.
▶ Please make sure that the screen is not exposed directly to a bright light. Please move the camera if necessary.
Please readjust the back focus of the camera.
▶
• The screen is dark.
▶ Please adjust the contrast feature of the monitor.
• There is a problem with the camera operation. The camera surface is too hot
and black stripes appear on the screen.
Please check if an appropriate power source to the camera complies with the manufacturer's standard
▶
requirement, or if the voltage keeps changing.
• The MOTION DETECTION function is not working.
Please check if 'MOTION DETECTION' mode is turned on.
▶
▶ Please check if the MD LEVEL is too low.
Please check the setting of the MD AREA.
▶
• Colors are not quite right.
Please check the 'WHITE BAL' setting.
▶
• The screen is flickering.
▶ Please check if the camera is facing directly into sunlight or fluorescent light.
Please check the connection of the lens connector cable.
▶
• L/L mode isn't able to be selected.
▶ Have you connected your camera to DC power source? Connect it to AC power source.
Please check the frequency of power supply (60Hz for NTSC, 50Hz for PAL).
▶
• DAYNIGHT(Auto) mode is not working.
Please check if the AGC menu is set to the OFF position.
▶
• SENS-UP function is not working.
▶ Please check if the AGC menu is set to the OFF position.
Please check if the SHUTTER menu is set to A.FLK mode.
▶
▶ Please check the limit of SENS-UP AUTO mode.
• Audio is not working
NETWORK CAMERA
73
User's Manual