Kodak i1420 User Manual page 63

58
Toolbar buttons
Zoom In: enlarges the image that is currently displayed in the
preview area.
Zoom Out: reduces the image that is currently displayed in the
preview area.
Preview Quality: selects the quality of the preview image.
• Normal: displays acceptable image quality at a lower
resolution.
• High: displays the most accurate representation of the actual
image. The image that is displayed in the preview area is a
good representation of what the final image will look like.
Units: selects the unit of measurement for the scanner; this
includes the preview area and any size-related options. The
Units options are: Inches, Centimeters and Pixels.
Preview Area
The preview area displays a sample of the color dropped image based
on some of the current shortcut settings (e.g. Black and White:
Conversion quality, Contrast, Threshold). An image will be displayed in
this area after a preview scan has been performed.
• Outline: When the Single tab is displayed, the preview area also
shows the current Outline selections. If the outline does not align with
the desired area on your preview image, you may use the mouse to
adjust the size and location of the outline. As the mouse cursor
moves around the outline, the cursor will change indicating that you
can adjust the outline by pressing and holding the left mouse button.
- Move: place the mouse cursor within the outline to adjust the
location of the outline.
- Corner: place the mouse cursor over one of the corner graphics
to adjust two sides at the same time.
- Side: place the mouse cursor over one of the side graphics to
adjust that side
.
Done — returns you to the Enhancements tab. When selected, you will
be prompted to save any unsaved changes.
Information icons
About: displays the scanners' version and copyright information.
Help: displays help information for the window currently being
displayed.
A-61550 May 2007