Kodak i1420 User Manual page 61

56
Blank Image Detection — allows you to configure the scanner to not
include blank images.
• On: turns Blank Image Detection on and makes the rest of the Blank
Image Detection options available.
• Delete if file size is less than: allows you to select the minimum
image size that the scanner will consider to be non-blank. Any image
that is less than this value will be considered blank and will not be
given to the scanning application. The values range from 1 to 1000
KB (1 KB equals 1024 bytes).
Color Dropout — used to eliminate a form's background so that only
the entered data is included in the electronic image (i.e., remove the
form's lines and boxes). For black and white images, these settings
effect the grayscale version of the document which the scanner
analyzes to produce that electronic image.
• Color: select the desired dropout color.
- (none)
- Red
- Green
- Blue
NOTE: For i1440 Scanners only: If you created custom dropout
colors, these colors will also be available in the Color drop-
down list.
The following options are for the Kodak i1440 Scanner only.
• Form data is color: allows you to indicate that a color other than
black or dark blue ink, was used for the data entered on the form.
• Configure: displays the Color Dropout Configuration window, which
allows you to create and change custom dropout colors. If you have
any unsaved changes for the current Setting Shortcut, you will be
prompted to save those changes.
NOTE: The Color Dropout options are only available when the Scan
as selection is Black and White or Grayscale.
A-61550 May 2007