Electrolux ER 8133 I Instruction Book page 20

Should adjustment of the furniture door be
necessary, use the clearance of slots as required.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Fix cover (D) on guide (B) until it clips into place.
If the appliance is fixed to the side of the kitchen unit,
simply slacken the screws in fixing brackets (D),
move the brackets as shown in the figure and re-
tighten the screws.
Then fit cover (E).
After completion of the door reversing operation,
check that the door gasket adheres to the
cabinet. If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of
the gasket or accelerate this process by heating
up the part involved with a normal hairdryer on a
low setting.
20
PR168
B
D
PR167/1
D734
D
E