Audio - DirecTV R16NC-500 User Manual

System Setup
IR/RF Setup
Certain remote control models feature RF (radio frequency) capability. Refer
to the model number printed on the top left corner of your DIRECTV Remote
Control. A letter R at the end of the model number (which may be followed by
other letters) indicates that the remote supports radio frequency. If no letters
follows the number, the remote works in IR mode only.
If you have a remote with RF capability you can change the remote's signal from
Infrared (IR) to RF. While the IR signal requires a clear line of sight to the front
of the receiver, RF signals let you put your receiver inside a cabinet or behind
solid doors and still be able to command it from up to 200 feet away.
Note:
Not all DIRECTV Receivers are RF-capable.
Receiver Mode
Select "Receiver Mode" if you want to use one remote to command a second
DIRECTV Receiver.
®

Audio

Select "Audio" to make a persistent change to your audio settings.
Audio options include:
Language: Select your preferred audio language, i.e. English,
Spanish, Chinese, etc...
Sound Effects: Select the volume of sound effects
DIRECTV PLUS DVR
®
72
USER GUIDE