Your Remote Control; Turning Your Equipment On And Off - DirecTV R16NC-500 User Manual

Your Remote Control

Turning Your Equipment On and Off

Mode Switch
DIRECTV PLUS DVR
®
14
Note: Each time you press a button, a green light at the top of the remote
flashes. If the light flashes several times for just one press, it means the
batteries (size AA) are getting low and need to be replaced.
These two buttons turn your TV and DIRECTV
your DIRECTV
been programmed to operate your TV. If you need to reprogram the remote
for a new TV or other audio-visual equipment, press MENU, select Parental,
Fav's & Setup, then System Setup, then Remote, and follow the step by step
instructions.
Use the POWER (PWR) button and Mode Switch to turn a single component
on or off (for example a DVD player or surround sound system). Simply slide
the mode switch to the position that matches the component you want to
control and then use the POWER button to turn it off or on. The mode switch
must always be in the left-most position to control your DIRECTV
If the mode switch is in a position that has not been programmed, or if you
press a button that is not supported by that particular piece of equipment, an
onscreen message will pop up to alert you.
USER GUIDE
System was installed professionally, your remote has already
®
Receiver on or off together. If
®
Receiver.
®