Determining Wall Plate Location Under Your Cabinet - Samsung SMH1927B/XAA Installation Instructions Manual

C. DETERmINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position – beneath flat bottom cabinet.
At least 30˝
s
Plate position – beneath recessed bottom cabinet with
Plate position – beneath recessed bottom
front overhang.
cabinet with front overhang
t
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 9
16 ½˝
C L Draw a vertical line on the
wall at the center of the 30˝
wide space. Tape the Rear
Wall Template onto the wall
so that the top of the template
touches the bottom of the
cabinet and the centerline on
the template lines up with the
line you drew on the wall.
Draw a horizontal line to
Draw a line on the
mark how far the inside
back wall equal to the
of the front overhang
depth of the front
descends below the
overhang.
cabinet.
C L
30˝ to Cooktop
30" to Cooktop
Step-by-step installation guide
Plate position – beneath framed recessed cabinet
bottom.
Draw a vertical line on the wall at the center of the 30˝ wide
space. Tape the Rear Wall Template onto the wall so that the
top of the template touches the bottom of the cabinet frame
and the centerline on the template lines up with the line you
drew on the wall.
Your cabinets may have decorative trim that interferes
with the microwave installation. Remove the decorative
trim to install the microwave properly and to make it
level.
THE mICROWAVE mUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
Draw a vertical line on the wall at the center of the 30˝
wide space. Draw a second, horizontal line on the wall
below the cabinet to mark how far the inside of the
front overhang descends below the cabinet. Tape the
Rear Wall Template onto the wall so that the top of the
template touches the bottom of the horizontal line and
the centerline on the template lines up with the vertical
line.
9
C L
30˝ to Cooktop
2012-07-25 7:54:32