Determining Wall Plate Location Under Your Cabinet - Samsung SMH2117S Installation Instructions Manual

C. DETERmINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position – beneath flat bottom cabinet.
s
Plate position – beneath recessed bottom
cabinet with front overhang.
t
SMH1816_XAC_DE68-03943B-01_EN_120725.indd 9
16 ½˝
C L
Draw a vertical line on the
wall at the center of the
At least 30˝ 30˝ wide space. Tape the
Rear Wall Template onto
the wall so that the top
of the template touches
the bottom of the cabinet
and the centerline on the
template lines up with the
line you drew on the wall.
Draw a horizontal line to
mark how far the inside
of the front overhang
descends below the
cabinet.
C L
30˝ to Cooktop
Step-by-step installation guide
Plate position – beneath framed recessed
cabinet bottom.
Draw a vertical line on the wall at the center of the 30˝
wide space. Tape the Rear Wall Template onto the wall
so that the top of the template touches the bottom of
the cabinet frame and the centerline on the template
lines up with the line you drew on the wall.
Your cabinets may have decorative trim that interferes
with the microwave installation. Remove the decorative
trim to install the microwave properly and to make it
level.
THE mICROWAVE mUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
Draw a vertical line on the wall at the center of the 30˝
wide space. Draw a second, horizontal line on the wall
below the cabinet to mark how far the inside of the
front overhang descends below the cabinet. Tape the
Rear Wall Template onto the wall so that the top of the
template touches the bottom of the horizontal line and
the centerline on the template lines up with the vertical
line.
9
C L
30˝ to Cooktop
2012-07-25 7:50:48