Using Directives In Merge Data - Lexmark C792 Administrator's Manual

Administration of Lexmark Document Producer

Using directives in merge data

You can include the following directives in the merge data to override activation conditions and other settings associated
with formsets in the system:
Directive
#!FORM_SET=name!# *
#!DEFAULT_FIELD_MAP=name!#
#!FIELD_MAP=name!#
#!FORM_NAMES=
(1, PPF_file_name_1),
(2, PPF_file_name_2)...!#
* The FORM_SET directive is required when any other directives are used.
Effect
Specifies a formset to use for
the print job. Page activation
conditions within the specified
formset will be used.
Specifies the name of the field
map file to use for the page of
data within which the directive
appears and all following pages
until a FIELD_MAP directive
or another
DEFAULT_FIELD_MAP
directive is found
Specifies the name of the field
map file to use for the page of
data within which the directive
appears
Specifies the page numbers of
the forms from the specified
formset to create from the
page of data in which the
directive appears and the page
print profile (PPF file, created in
Forms Composer) to use. Page
print profiles are optional and
may be blank; in such a case,
parentheses are still required,
but the comma inside each set
of parentheses is optional.
Note: You can save up to 255
characters for the page print
profile file name.
Overrides
Project activation conditions
in the formsets loaded in the
system
The field map specified in the
formset
The field map specified in the
formset and any
DEFAULT_FIELD_MAP
directive
Page activation conditions in
the formset and any
DEFAULT_FORM_NAMES
directive
35
Valid location
Within first
page of data
(Only one
formset is
used for the
print job.)
Anywhere;
valid once per
page
Anywhere;
valid once per
page
Anywhere;
valid once per
page