Table of Contents
Advertisement
system setup
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to
match the video.
1.
In Stop mode, press the MENU button.
.
Press the Cursor % button to move to Audio and then press the
ENTEr button.
.
Press the Cursor % button to move to AV-SYNC and then press
the ENTEr button.
.
Press the Cursor , button to select the AV-SYNC Delay Time
and then press the ENTEr button.
You can set the audio delay time between 0 ms and 300 ms. Set
~
it to the optimal status.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1.
In Stop mode, press the MENU button.
.
Press the Cursor button to move to Audio and then press the
ENTEr button.
.
Press the Cursor button to move to HDMI AUDIO and then
press the ENTEr button.
.
Press the Cursor , button to select ON or OFF and then press
the ENTEr button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
`
The default setting of this function is HDMI AUDIO OFF.
`
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
50
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
EXIT
RETURN
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Advertisement
Table of Contents
