Setting The Drc (Dynamic Range Compression); Setting The Av Sync; Setting The Hdmi Audio - Samsung HT-X725 User Manual

System setup
Manually Adjusting the Speaker Volume and Balance with the SOUnD EDIT Button.
Press the SOUnD EDIT button and then press the Cursor
_, + button.
Each time you press the SOUnD EDIT button, you can see
~
the balance and level for each speaker.
Adjusting Front/rear Speaker Balance
`
You can select between 0 dB, -6 dB, and OFF.
`
The volume decreases as you move closer to – 6 dB.
Adjusting Centre/rear/Subwoofer Speaker Level
`
The volume level can be adjusted in steps from +6dB to –6dB.
`
The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

SETTInG THE DrC (DYnAMIC rAnGE COMPrESSIOn)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby
Digital sound when watching movies at low volume at night.
1. In Stop mode, press the MEnU button.
. Press the Cursor % button to move to Audio and then press the
EnTEr or + button.
. Press the Cursor % button to move to DrC and then press the
EnTEr or + button.
4. Press the Cursor $, % to adjust the DrC.
~ When the Cursor $ button is pressed, the effect is greater, and
when the Cursor % button is pressed, the effect is smaller.
d Press the rETUrn button to return to the previous level.
d Press the EXIT button to exit the setup screen.
5
MOVE ENTER RETURN EXIT
CHANGE RETURN EXIT

SETTInG THE AV SYnC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to
match the video.
1. In Stop mode, press the MEnU button.
. Press the Cursor % button to move to Audio and then press the
EnTEr or + button.
. Press the Cursor % button to move to AV-SYnC and then press the
EnTEr or + button.
4.
Press the Cursor $, % button to select the AV-SYnC Delay Time
and then press the EnTEr button.
~ You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
d Press the rETUrn button to return to the previous level.
d Press the EXIT button to exit the setup screen.

SETTInG THE HDMI AUDIO

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1. In Stop mode, press the MEnU button.
. Press the Cursor % button to move to Audio and then press the
EnTEr or + button.
. Press the Cursor % button to move to HDMI AUDIO and then press
the EnTEr or + button.
4. Press the Cursor $, % button to select On or OFF and then press
the EnTEr button.
On : Both video and audio signals are transmitted over the HDMI
~
connection cable, and audio is output through your TV
OFF : Video is transmitted over the HDMI connection cable only, and
~
through the home cinema speakers only.
d Press the rETUrn button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M
` The default setting of this function is HDMI AUDIO OFF.
` HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
MOVE ENTER RETURN EXIT
MOVE SELECT RETURN EXIT
MOVE ENTER RETURN EXIT
speakers only.
audio is output
MOVE SELECT RETURN EXIT
5