Setting Up The Speaker Delay Time - Samsung HTZ210T User Manual

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each
speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can
adjust this difference by adding a delay effect to the sound of the Center and Rear Speakers.
Setting CENTEr SPEAKEr
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
1 feet,
between 0.00 inch
1.39 inches
Df and Dc
Delay Time 0 ms 1 ms
Setting rEAr SPEAKEr
If the distance of Dc is equal to or longer than the distance of Dr
in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance
3 feet,
0.00 inch
between
5.73 inches
Df and Dc
Delay Time 0 ms 3 ms
M
`
With PL II (Dolby Pro Logic II), the delay time may be different for each mode.
`
With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
`
The Center channel is only adjustable on 5.1 channel discs.
2 feet, 3 feet, 4 feet,
9.29 inches
2.77 inches 5.73 inches 7.12 inches
2 ms 3 ms 4 ms
6 feet, 10 feet, 13 feet,
4.27 inches
11.7 inches 4.80 inches 10.54 inches
6 ms 9 ms 12 ms
5 feet,
5 ms
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Dr: The distance from REAR SPEAKER
17 feet,
15 ms
Ideal CENTER SPEAKER
placement
Ideal
REAR
SPEAKER
placement