AEG 70318-5 KG User Manual page 27

12 Unscrew the top handle
bracket from the handle rod
(1). Unscrew the bottom hand-
le bracket from the door (2).
13. Unscrew the top handle
bracket from the door (3) and
screw onto the bottom right-
hand side of the door (4).
14. Turn the handle bracket with
the handle rod 180° and screw
them to the door (5) and the
fitted handle bracket (6).
15. Move the small plug from right
to left.
Attention!
Do not overtighten the screws
(max. 2 Nm) as you may dama-
ge the door handles.
After having reversed the ope-
ning direction of the doors
check that all the screws are
properly tightened and that the
magnetic seal adheres to the
cabinet. If the ambient tempe-
rature is cold (i.e. in Winter), the
gasket may not fit perfectly to
the cabinet. in that case, wait
for the natural fitting of the
gasket or accelerate this pro-
cess by heating up the part
involved with a normal hair-
drier.
27