Adjusting The Mx Plus Level (Mx Plus Setup/Level Adjustment); Adjusting Balance (Between Left And Right) (Balance); Adjusting Fader (Between Front And Rear) (Fader); Setting Defeat (Defeat) - Alpine PXA-H800 Owner’s Manual

From the Commander
Adjusting the MX Plus Level (MX PLUS
SETUP/LEVEL ADJUSTMENT)
Adjust the MX Plus level. In the Ai-NET mode, the adjustment is
performed for the current source (Initial setting: "OFF" / "Non Effect").
When an Ai-NET compatible head unit is connected:
Setting item: DVD: OFF/Cinema/Action/Music
AUX/Others: OFF/Compressed/Music/
DVD
CD/Compressed Data/FM/Digital Radio:
OFF/Level1/Level2/Level3
When an Ai-NET compatible head unit is not connected:
Setting item: Non Effect/Compressed 1/Compressed 2/
Compressed 3/Music 1/Music 2/Music 3/
Cinema/Action/Drama/Talk
• For MX Plus, refer to "Setting the MX Plus (Ai-NET Mode)"
(page 44) and "Setting the MX Plus (Standalone Mode)" (page 45).
Adjusting Balance (Between Left and
Right) (BALANCE)
Adjust the Right and Left speaker volume (Initial setting: "0").
Setting contents: L (Left) 15 to 0 (Center) to R (Right) 15
• When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.
Adjusting Fader (Between Front and Rear)
(FADER)
Adjust the Front and Rear speaker volume (Initial setting: "0").
Setting contents: F (Front) 15 to 0 (Center) to R (Rear) 15
• When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.

Setting Defeat (DEFEAT)

When is set to "ON", the settings for ImprintEQ, Graphic EQ,
Parametric EQ, MX Plus, RoadEQ, and Time Collection are restored to
the initial values (Initial setting: "OFF").
Setting contents: ON/OFF

Adjusting Volume (VOLUME)

Adjust the volume (Initial setting: "-∞ dB").
Setting contents: -∞ to 0.0 dB
• When an Ai-NET compatible head unit is connected, the audio
settings are adjusted at the head unit and you cannot set them on the
unit itself.

Switching the Sources

The unit accepts up to five analog signal input lines and 2 digital signal
input lines. For the connection, refer to the installation manual.
When an Ai-NET compatible head unit is connected, the source should
be switched at the head unit. This feature is disabled on the Commander.
36
-EN
1
Press [SOURCE].
Each push switches the source.
AUX1 AUX2 AUX3
DIGITAL1 DIGITAL2
• The number of analog signal inputs varies depending on the setting
in "Setting the AUX Input System (AUX Input Setup)" (page 39).
• Only the sources set as ON in "Setting the AUX Input (AUX IN)"
(page 39) and "Setting the Digital Input (Digital AUX)" (page 40)
are displayed.
• Names selected in "Naming the AUX Input (AUX Name)" (page 41)
are displayed as the source names.

Storing the Preset Values (Preset Store)

You can store up to 6 sets of the adjustment/setting values. All of the
following adjustment/setting values are stored in a single preset
memory.
Adjustment/Setup items
Setting the Speaker System (System Select)
Setting the Speakers(Speaker Setup)
Setting the Subwoofer Output (SW Channel)
Setting the AUX Input System (AUX Input Setup)
Setting the AUX Input (AUX IN)
Setting the Digital Input (Digital AUX)
Setting the AUX Volume Input Level (AUX IN Gain)
Adjusting the AUX Volume Level (AUX Level)
Naming the AUX Input (AUX Name)
Turning ImprintEQ On/Off
Turning RoadEQ On/Off
Setting the MX Plus (Ai-NET Mode)
Setting the MX Plus (Standalone Mode)
Setting the Equalizer Mode (EQ Mode)
Setting the Graphic EQ
Setting the Parametric EQ
Adjusting X-Over and Switching the Phases
Adjusting the Time Correction (TCR)
Setting the 2-Channel Signal Playback Mode (Mode)
Setting EUPHONY (EUPHONY)
Using Dolby Pro Logic II (Dolby PLII)
Adjusting the Center Width (Center Width)
Adjusting the Speaker Volume Level (Output Level)
Adjusting the Acoustic Image (BI-PHANTOM)
Mixing the Low Range Audio for the Rear (Rear Mix)
Mixing the Low Range Audio of the Center with the Front
L/R (Center Bass Split)
Setting the Linear PCM (PCM Mode)
Achieving Powerful High Volume Sound (Listening Mode)
Adjusting the DVD Level (DVD Level)
1
Adjust the value you want to store and set it.
2
Press [FUNC.].
3
Rotate the [Rotary encoder] to select "Preset," and
then press the [Rotary encoder].
4
Rotate the [Rotary encoder] to select "Store," and
then press the [Rotary encoder].
Ai-NET(HU) Ai-NET(CHG)
AUX1
Pages
37
38
38
39
39
40
40
40
41
42
43
44
45
46
46
47
49
50
52
52
53
53
54
55
55
56
56
56
57