Panasonic KX-TG8200E Quick Manual page 6

TG8200_8220E(e)_QG.fm Page 6 Wednesday, May 30, 2007 6:41 PM
Frequently asked questions
Question
What do I need to do to
display caller information?
What should I do when:
– I hear static or sound cuts
in and out?
– there is interference from
other electrical units?
What should I do when the
operating time seems to be
short even after I fully
charged the batteries?
What do I need to do to
erase W (Missed call) from
the display?
Cause & solution
L You need to subscribe to Caller ID service.
Consult your service provider/telephone company
for details.
L The message "You must first subscribe
to Caller ID." will be displayed until you
receive caller information after subscribing to
Caller ID service.
L Place the handset and the base unit away from
other electrical appliances.
L Move closer to the base unit.
L Your unit is connected to a telephone line with
DSL service. We recommend connecting a filter
(contact your DSL service provider) to the
telephone line between the base unit and the
telephone line jack.
L Wipe the battery ends (S, T) and the unit
contacts with a dry cloth.
L There are unviewed missed calls remaining. View
them using the following method.
1
" (centre of joystick) i j i #
2
Push the joystick down to search from the most
recent call, or push the joystick up to search
from the oldest call.
– 6 –