Canon PowerShot Pro 1 User Manual page 23

Trim the image.
Changing the Size of the Trimming Frame
Press the up and down buttons to adjust the size of the
trimming frame.
The trimming frame can be changed to a minimum selection
of approximately half the displayed image or a maximum
selection that is virtually the same size as the image.
Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
When printing an image that has been magnified using the
2b
trimming option, the image quality may become coarser and
grainier depending on the level of magnification. If this
happens, the trimming frame displays in red.
Rotating the Trimming Frame
You can rotate the trimming frame using the left and right
buttons.
Moving the Trimming Frame
Press the SET button and use the up, down, right and left
buttons to move the trimming frame. Pressing the SET button
again allows you to change the size of the frame and to rotate
it.
3b
The trimming setting only applies to one image.
The trimming setting is canceled with the following
operations.
• When you set the trimming settings for another image.
• When you close the Print mode (when you turn the camera
power off, change the camera mode, or detach the
connection cable).
Press the MENU button, select
[OK] and press the SET button.
Selecting [Cancel setting] cancels the
selected trimming setting. If [Edit] is
selected, the display returns to the
previous screen.
21