Using On-Screen Menus - HP p650 Quick Start Manual

Using On-screen Menus

• Example REC Menu Screen Operation
1.
In the REC mode, press [SET].
2.
Use [ ] and [ ] to select the second Control Panel
option from the bottom (MENU) and then press
[SET].
This will display the REC menu screen.
3.
Use [ ] and [ ] to select the tab where the menu
item you want to configure is located.
4.
Use [ ] and [ ] to select the menu item you
want, and then press [ ].
5.
Use [ ] and [ ] to change the setting of the
selected menu item.
6.
After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
• Pressing [ ] instead of [SET] applies the
selected setting and returns to the menu item
selection.
• To configure settings on another tab after
pressing [ ] to return to the menu item selection,
use [ ] or [
up to the tabs, and then use [ ] and [ ] to select
the tab you want.
NOTE
• [ ] (Delete) provides a helpful way to navigate around tabs and menus.
– Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen.
– Pressing [ ] (Delete) while menu item or setting is selected will "back step" in
the following sequence: Settings
] (Delete) to move the highlighting
Menu items Tab.
7
[ ] [ ] [ ] [ ]
[SET]
Example:
When " Quality" is
selected on the "Quality"
tab
Tabs
Quality Setup
REC
Fine
Quality
EV Compensation
Normal
White Balance
ISO
Color Mode
Settings
Selected menu item