Set Up The Computer - HP Compaq nw9440 - Mobile Workstation Getting Started

Set up the computer
CAUTION: To prevent file corruption and to ensure that the correct drivers
Ä
are installed:
■ Do not set up the computer for the first time while the computer is
docked in an optional docking device.
■ During the hardware and software setup procedures:
❏
❏
When setting up the computer, you will
1. Insert the battery pack into the computer so that it can begin
to charge as soon as the computer is connected to external
power.
2. Connect the computer to external power.
3. Turn on the computer.
4. Set up the software.
Getting Started
Do not unplug the computer from external power.
Do not shut down the computer or initiate Sleep or
Hibernation.
First-time setup
1–9