Table of Contents
Advertisement
In the User Mode, colors of R (Red), G (Green), and B (Blue) are
userconfigurable; the adjusting range is from 0 ~ 100.
3.
Image
You can adjust the image Sharpness, Trace Free,Aspect Control,ASCR,
Position (VGA only), and Focus (VGA only) from this main function.
•
Sharpness: Adjust the picture sharpness. The adjusting range is from 0
to 100.
•
Trace Free:
adjusting range is from lower 0 to faster 100.
•
Aspect Control: Adjust the aspect ratio to "Full", "4:3", or "Over Scan"
(Only available for HDMI input).
•
ASCR:Turns on/off the ASCR (ASUS Smart Conrtast Ratio) function.
•
Position: Adjust the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100 .
•
Focus: Reduce Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 .
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one horizontal
sweep. If the frequency is not correct, the screen shows vertical stripes and the
image is not proportional.
3-3
ML229
Splendid
Color
Image
Input Select
System Setup
Move
Speed up the response time by Over Drive technology. The
Sharpness
Trace Free
Aspect Control
ASCR
Position
Focus
Menu
Exit
Chapter 3: General Instruction
50
0
Full
Advertisement
Table of Contents
