Asus VX278 Troubleshooting Manual

LCD Monitor Troubleshooting - No display
after turning monitor ON
Last Update : 2018/11/05 15:49
Send to Email Open on your smart phone
LCD Monitor Troubleshooting - No display after turning monitor ON
No display after turning monitor ON ( screen is black but power supply lights is ON)

Make sure if the operating system had entered hibernation, sleep or power-save mode.
Press any key (Enter key / Power key) or move the mouse to wake it up.

Check if the signal cable (VGA / DVI / HDMI / DisplayPort) is well connected , and
confirmed another end of the output cable has been firmly connected to computer input
port (graphics card). Unplug and plug 2-terminals again to ensure all pins aren't bent.
VGA

Press
ports) -> Select the correct input port
NOTE: If this model doesn't have the button, please press "MENU" to enter OSD
menu. The MENU button's position depends on different models
DVI
to select corresponding mode (If this model has a variety of input
HDMI D