Asus ML248H User Manual

Asus ml248h: user guide
Hide thumbs Also See for ML248H:

Advertisement

ML248 Series
LED Monitor
User Guide

Advertisement

Table of Contents
loading

Summary of Contents for Asus ML248H

  • Page 1 ML248 Series LED Monitor User Guide...
  • Page 2: Table Of Contents

    Chapter 3: General instructions OSD (On-Screen Display) menu ... 3-1 3.1.1 3.1.2 3.2 Specifications summary (ML248H) ... 3-4 Troubleshooting (FAQ) ... 3-5 Supported operating modes ... 3-6 Front view ... 1-2 Back view ... 1-3 How to reconfigure ... 3-1 OSD function introduction ... 3-1...
  • Page 3: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However,...
  • Page 4: Safety Information

    Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard. • Do not overload power strips and extention cords. Overloading can result in fire or electric shock.
  • Page 5: Care & Cleaning

    Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the monitor. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • The screen may flicker during the initial use due to the nature of the fluorescent light.
  • Page 6 Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
  • Page 7: Welcome

    Welcome! Thank you for purchasing the ASUS The latest widescreen LED monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you! Package contents Check your package for the following items: LED monitor Quick start guide Warranty card Power cord + power adapter VGA cable...
  • Page 8: Monitor Introduction

    Monitor introduction 1.3.1 Front view button: • Selects a desired preset mode. • Exits the OSD menu or goes back to the previous menu when the OSD menu is active. • Automatically adjusts the image to its optimized position, clock, and phase by touching this button for 2-4 seconds (for VGA mode only). • Decreases values or moves your selection left/down. • Contrast hotkey MENU button: • Turns on the OSD menu. Enacts the selected OSD menu item. Chapter 1: Product introduction...
  • Page 9: Back View

    DC-IN port. This port connects the power cord. VGA port. This 15-pin port is for PC VGA connection. HDMI port. This port is for connection with an HDMI compatible device. Earphone jack. This port is only available when an HDMI cable is connected. Kensington lock slot. ASUS ML248 Series LED Monitor Status Description White White (fitful) Standby mode...
  • Page 10 Chapter 1: Product introduction...
  • Page 11 Assembling the monitor arm/base To assemble the monitor arm/base: Have the front of the monitor face down on a table. Place the circular arm on the back of the monitor by aligning the pins on the arm with the slots on the monitor. Use a coin or the like to turn the screw until the circular arm is securely attached to the monitor. Put the screw cover on the screw. Attach the circular base to the arm by using a coin or the like to turn the screw until the circular base is securely attached to the arm. The arm/base installation is complete. We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. Base ASUS ML248 Series LED Monitor...
  • Page 12: Chapter 2: Setup

    Adjusting the monitor • F or optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • Y ou can adjust the monitor’s angle from adjustment from either left or right. It is normal that the monitor slightly shakes while you adjust the viewing angle. allows +20˚ to -5˚ and it º swivel 20˚ º º Chapter 2: Setup...
  • Page 13: Connecting The Cables

    Connect the other end of the VGA/HDMI-DVI cable to your computer's VGA/DVI port. Tighten the two screws to secure the VGA/DVI connector. • To use the earphone (only when an HDMI cable, not the supplied HDMI- DVI cable, is connected): connect the end with plug type to the monitor’s earphone jack. When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu. Turning on the monitor Tap the power button . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON. ASUS ML248 Series LED Monitor...
  • Page 14 Chapter 2: Setup...
  • Page 15: Osd (On-Screen Display) Menu

    Night View Mode: best choice for dark-scene games or movies with SPLENDID™ Video Enhancement. • sRGB Mode: best choice for viewing photos and graphics from PCs. In the Standard Mode, the ASCR, Saturation and Sharpness functions are not user-configurable. ASUS ML248 Series LED Monitor to change the settings of the selected function. button repeatedly until the...
  • Page 16 • Sharpness: the adjusting range is from 0 to 100. • Trace Free: adjusts the response time of the monitor. • Aspect Control: adjusts the aspect ratio to full, 4:3, or overscan (only available for the HDMI input). • ASCR: turns on/off the ASCR (ASUS Smart Contrast Ratio) function. • Position: adjusts the horizontal position (H-Position) and the vertical position (V-Position) of the image. The adjusting range is from 0 to 100. • Focus: reduces Horizonal-line noise and Vertical-line noise of the image by adjusting (Phase) and (Clock) separately. The adjusting range is from 0 to 100. • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances.
  • Page 17 Volume: the adjusting range is from 0 to 100. • ECO Mode: reduces power consumption. • OSD Setup: Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100. Adjusts the OSD timeout from 10 to 120 seconds. Enables or disables the DDC/CI function. • Information: shows the monitor information. • Language: there are 10 languages for your selection, including English, German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese, Simplified Chinese, and Japanese. • All Reset: “Yes” allows you to restore the default settings. ASUS ML248 Series LED Monitor...
  • Page 18: Specifications Summary (Ml248H)

    16.7 M 2 ms 6 video preset modes (by hotkey) Yes (by hotkey) 4 color temperatures 3 skin-tones HDMI v1.3 D-Sub Yes (Only for HDMI) Black (front side)/White (back side) White (On)/White (Standby) +20˚~ -5˚ +20˚~ -20˚ AC: 100~240V For use only with power supply via Asus ADP-40PH AB Power On: < 30 W, Standby: < 1 W, Power Off: < 1 W 0˚C~40˚C -20˚C~+60˚C 572 mm x 431 mm x 221 mm (machine) 650 mm x 483 mm x 171 mm (package) 4.1 kg (Net); 6.1 kg (Gross) 10 languages (English, German, Italian, French, Dutch, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese) VGA cable, HDMI-DVI cable, Power cord, Power adapter, Quick start guide, Warranty card Energy Star , CB, CE, Gost-R, CCC, UL/cUL, FCC, ®...
  • Page 19: Troubleshooting (Faq)

    Screen image bounces or a wave pattern is present in the image Screen image has color defects (white does not look white) Screen image is blurry or fuzzy No sound or sound is low ASUS ML248 Series LED Monitor Possible Solution • Tap the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet.
  • Page 20: Supported Operating Modes

    Supported operating modes Resolution Horizontal Frequency Frequency (KHz) 720 x 400 31.47 640 x 480 31.47 640 x 480 35.00 640 x 480 37.87 640 x 480 37.50 800 x 600 35.16 800 x 600 37.88 800 x 600 48.08 800 x 600 46.86 832 x 624 49.72 1024 x 768 48.36 1024 x 768 56.476 1024 x 768 60.02 1152 x 864 67.50 1280 x 960 60.00 1280 x 1024 63.98 1280 x 1024 79.98 1366 x 768 47.712...

This manual is also suitable for:

Ml248 series

Table of Contents