Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: designed to provide reasonable protection against harmful interference in a there is no guarantee that interference will not occur in a particular installation. If measures: receiver is connected.
Safety information with the package. radiator or heat source unless proper ventilation is provided. standard. fire or electric shock. of time. This will protect the monitor from damage due to power surges. cabinet. computers which have appropriate configured receptacles marked between be placed in municipal waste.
Care & Cleaning and power cord. Follow the correct lifting techniques when positioning the with a cloth dampened with mild cleaner. inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
Page 7
Refer to the following sources for additional information and for product and software updates. ASUS websites Optional documentation package.
Monitor introduction 1.3.1 Front view button: Selects a desired preset mode. menu is active. Turns on the OSD menu. Enacts the selected OSD menu item. Chapter 1: Product introduction...
button: Selects an available input source. The color definition of the power indicator is as the below table. Status Description White 1.3.2 Back view L Series(ML238/ML239) only for H SKU S Series(MS236/MS238/MS246/MS248) only for H SKU...
M Series (20'' only of D SKU) M Series (20'' only of N SKU) Rear connectors DC-IN port. This port connects the power cord. VGA port . This port is for connection with an HDMI compatible device. Earphone jack connected. Kensington lock slot.
Page 12
Assembling the monitor arm/base Have the front of the monitor face down on a table. screw. damage to the monitor. Base...
Connecting the cables Connect the cables as the following instructions: L Series(ML238/ML239) only for H SKU S Series(MS236/MS238/MS246/MS248) only for H SKU M Series (20'' only of D SKU) M Series (20'' only of N SKU)
To connect the power cord: Connect one end of the power cord to the power adapter and the other end to a power outlet. port. earphone jack. Input Select item in the OSD menu. Turning on the monitor Tap the power button .
OSD (On-Screen Display) menu the OSD menu. Ta p navigate through the functions. Highlight the desired function again to navigate through the sub-menu functions. Highlight the desired sub- to change the settings of the selected function. OSD menu disappears. repeat steps 1-3. 3.1.2 OSD function introduction Splendid...
Page 17
Color Brightness: the adjusting range is from 0 to 100. function. Contrast: the adjusting range is from 0 to 100. activate this function. Saturation: the adjusting range is from 0 to 100. Color Temp. Skin Tone Smart View configurable; the adjusting range is from 0-100. Smart View function do not use ML239 (wide view angle panel) Image from this function.
Page 18
Input Select System Setup Splendid Demo Mode: splits the screen into two for Splendid modes comparison. Volume: the adjusting range is from 0 to 100. ECO Mode: reduces power consumption. OSD Setup: Adjusts the OSD timeout from 10 to 120 seconds. Information: shows the monitor information.
Page 19
(MS208/MS238/MS248/ML239) Black(front side)/White(back side) (MS202/MS236/MS246/ML238) Tilt +20 ~ -5 Swivel +20 ~ -20 Kensington lock AC/DC adaptor input voltage Asus ADP-40PH AB Power consumption Temperature (Operating) 0 C~40 C Temperature (Non-operating) -20 C~+60 C 497mm*362mm*151mm (machine) 568mm*414mm*151mm(machine) 555mm*415mm*129mm(package) 640*mm510mm*145mm(package) MS202/MS208...
Troubleshooting (FAQ) Problem Possible Solution Tap the button to check if the monitor is connected to the monitor and the power outlet. Check if the monitor and the computer are no screen image connected the monitor and the computer. Inspect the signal cable and make sure none of the pins are bent.
Need help?
Do you have a question about the MS238H and is the answer not in the manual?
Questions and answers