Scanning A Document Using The Ica Driver (Mac Os X 10.6.X, 10.7.X) - Brother DCP-J140W Software User's Manual

Scanning
Scanning a document using the ICA driver (Mac OS X 10.6.x,
10.7.x)
You can scan a document using the ICA driver. If you installed MFL-Pro Suite from the installer CD-ROM, the
ICA driver has been already installed on your Macintosh. If you don't see your machine in the Print & Fax or
Print & Scan list, you can add your machine by clicking the + button.
Note
The screens in this section are from Mac OS X 10.6.x. The screens on your Macintosh will vary depending
on your operating system version.
a
Connect your Brother machine to the computer using a USB cable. Or connect your Brother machine to
the same Wireless LAN where the computer is connected.
b
Launch the Image Capture application.
c
Select the machine from the list on the left side of the screen.
If you connected the Brother machine and your computer with a USB cable, you will see the machine in
the DEVICES area. If connected via Wireless LAN, you will see it in the SHARED area.
Note
(For Mac OS X 10.7.x)
If you cannot see the machine in the DEVICES area or the SHARED area, point the mouse cursor over
the area, and then click Show.
6
6
114